88
11
DIGITAL MODE OPERATION
11
r
When a signal with the matched digital code/call sign is re-
ceived, the transceiver emits beep tones and blinks “
S
.”
• Beep tones sound for 30 sec. and “
S
” blinks. To stop the
beeps and blinking manually, push any key. When the beep
tones are not stopped manually, “
S
” continues blinking until
[PTT]
is pushed (see step
t
).
t
Push
[PTT]
to answer.
• “
S
” disappears and cancels the pocket beep function auto-
matically.
y
Push
[TONE•T-SCAN•BK]
several times until “CSQL” or
“DSQL” disappears to cancel the digital code squelch or
digital call sign squelch function.
■
Digital squelch function
The digital code (CSQL) or digital call sign (DSQL) squelch
opens only when receiving a voice signal with the same pre-
programmed digital code or call sign, respectively.
q
Set the operating frequency.
w
Program the digital code or call sign.
• See p. 99, “Digital code setting,” or pgs. 61, 62, “Call sign pro-
gramming” and p. 65, call sign setting.
e
Push
[TONE•T-SCAN•BK]
several times until “CSQL” or
“DSQL” appears in the function display.
• “CSQL” for digital code squelch; “
DSQL
” for digital call sign
squelch operation.
[TONE•T-SCAN]
ID-800H_1.qxd 2007.06.14 3:09 PM Page 88