37
5
MEMORY OPERATION
■
Memory bank selection
The ID-800H has a total of 10 banks (A to J). Each memory
channel, 1 to 500, may be assigned to one of the banks for
easy memory management.
q
Push
[M/CALL•PRIO]
several times to select memory
mode, if desired.
w
Push
[BAND•MODE]
to enter memory bank selection.
• Bank indicator blinks.
• When no memory bank is set, error beep sounds and the mem-
ory channel indicator nothing change. See the next page for
memory bank setting details.
e
Rotate
[DIAL]
to select the desired bank, A to J.
• Banks that have no programmed contents are skipped.
r
Push
[BAND•MODE]
to select the bank.
• Bank indicator stops blinking.
t
Rotate
[DIAL]
to select the channel in the bank.
• No channel numbers are displayed for memory bank operation.
y
To return to regular memory mode, push
[BAND• MODE]
twice.
z
Push
[MR/CALL]
to select memory mode, if
desired.
x
Push
[FUNC]
then
[
MONI
1(BANK)]
to enter
memory bank selection.
• Bank indicator blinks.
• When no memory bank is set, error beep sounds
and the memory channel indicator nothing change.
See the next page for memory bank setting details.
c
Push
[
Y
Y
]
/
[
Z
Z
]
to select the desired bank, A to J.
• Only programmed memory bank can be selected.
v
Push
[
CLR
A(MW)]
to select the bank.
• Bank indicator stops blinking.
b
Push
[
Y
Y
]
/
[
Z
Z
]
to select the channel in the bank.
• No channel numbers are displayed for memory
bank operation.
n
To return to regular memory mode, push
[FUNC]
,
[
MONI
1(BANK)]
then push
[
CLR
A(MW)]
.
BANK
[
Y
]/[
Z
]
[BAND•MODE]
Bank indicator blinks
ID-800H_1.qxd 2007.06.14 3:09 PM Page 37