Icom ID-800H Скачать руководство пользователя страница 42

Страница: 42 / 144

REPEATER OPERATION

DTMF tones

➥

Push

[DTMF-S]

, then push the keys of the de-

sired DTMF digits.

• The function indicator lights green.
• 0–9, A–D,

(E) and #(F) are available.

• When “d” is displayed in place of the 100 MHz digit,

cancel the DTMF memory encoder in advance.
(p. 53)

• Push

[DTMF-S]

again to return the keypad to nor-

mal function control.

✔

For your convenient!

The transceiver has 16 DTMF memory channels for au-
topatch operation. See p. 51 for details.

1750 Hz tone

The microphone has 1750 Hz tone capability, used for ring
tone when calling, etc.

Push

[FUNC]

• The function indicator lights orange.

Push

[

(TONE-1)]

to transmit a 1750 Hz tone

call signal for 0.5 sec.; push and hold

[0(TONE-2)]

to transmit a 1750 Hz tone call

signal for an arbitrary period.

• The function indicator goes out automatically.

Push ,

then or .

TONE-1

TONE-2

then push desired keys.

Push ,

DTMF-S

ID-800H_1.qxd 2007.06.14 3:09 PM Page 25

Содержание ID-800H

















































































































































Результаты поиска

Содержание ID-800H

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-800H, Инструкция по эксплуатации

Результаты поиска

Содержание ID-800H

Отзывы:

Бренды по названию

Популярные бренды