5
MEMORY OPERATION
36
5
■
Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push
[V/MHz•SCAN]
to select VFO mode.
w
Push
[S.MW•MW]
momentarily.
• “
!
” indicator and the memory channel number blink.
e
Rotate
[DIAL]
to select the memory channel to be cleared.
• Memory channels not yet programmed are blank.
r
Perform the following operation within 1.5 sec.
- Push
[S.MW•MW]
momentarily.
- Push and hold
[S.MW•MW]
for 1 sec.
• 3 beep sound, then the contents of the selected memory are
cleared.
• “
!
” indicator and the channel number blink.
• When clearing the call channel, the current VFO conditions are
re-programmed into the call channel automatically.
t
Push
[V/MHz•SCAN]
to return to VFO mode.
NOTE: BE CAREFUL!
— the contents of cleared memo-
ries CANNOT be recalled.
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO.
Rotate for selecting memory channel.
Push .
Push any switch, except .
Push momentarily, then push again for 1 sec.
Beep
Beep
Beep
“
“
“
“
“
ID-800H_1.qxd 2007.06.14 3:09 PM Page 36