5
MEMORY OPERATION
35
D
D
To indicate the channel name
[
The channel name indication can be set for independent
memory channels.
q
Push
[M/CALL•PRIO]
to select the memory mode.
w
Rotate
[DIAL]
to select the desired memory channel to be
indicated the channel name.
e
Push
[SET•LOCK]
to enter set mode.
• Rotate
[DIAL]
to select “SET,” if “CALLS” or “MESSAG” is dis-
played.
r
Push
[SET•LOCK]
or
[S.MW•MW]
several times to select
“ANM” item.
t
Rotate
[DIAL]
to turn the memory name indication ON.
y
Push any key below the display to exit set mode.
N
OTE:
When no memory name is programmed, the stored
frequency is displayed.
z
Push
[MR/CALL]
to select the memory mode.
x
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired memory
channel to be indicated the channel name.
c
Push
[
SET
B(D-OFF)]
to enter set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “SET,” if necessary.
v
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
until
“ANM” appear.
b
Push
[
Y
Y
]
or
[
Z
Z
]
to set the memory name indi-
cation ON and OFF.
n
Push
[
CLR
A(MW)]
to exit set mode.
Push
SET
B
ID-800H_1.qxd 2007.06.14 3:09 PM Page 35
