Icom ID-800H Скачать руководство пользователя страница 108

Страница: 108 / 144

DIGITAL MODE OPERATION

■

GPS operation

A GPS receiver (RS-232 output/NMEA format/4800 bps) can
be connected to

[DATA]

socket of the ID-800H to indicate the

current position (Latitude and Longitude). The position data
can also be transmitted with a message to another station.

Position indication

While connected to a GPS receiver and operating digital
(DV) mode, push

[SET•LOCK]

to enter set mode.

• Rotate

[DIAL]

to select “SET,” if “CALLS” or “MESSAG” is dis-

played.

Push

[SET•LOCK]

[S.MW•MW]

several times to select

the GPS setting.

• “GPS” appears.

Rotate

[DIAL]

to select the GPS setting ON, then push

[BAND•MODE]

to enter the sentence formatter set mode.

[DIAL]

[BAND•MODE]

[SET•LOCK]

ID-800H

OPC-1384

GPS receiver

to [DATA] socket

to RS-232 port

[DATA] socket

Rear view

ID-800H_1.qxd 2007.06.14 3:09 PM Page 91

Содержание ID-800H

















































































































































Результаты поиска

Содержание ID-800H

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-800H, Инструкция по эксплуатации

Результаты поиска

Содержание ID-800H

Отзывы:

Бренды по названию

Популярные бренды