8
Instruction Manual C200
2. Getting started
2.1 Delivered items
Column gauge, base with 4 screws ( M3x8 ) for fixing, instruction manual, programming card, and
a 2.0 mm Allen key.
Further accessories, such as IMBus measuring controllers, power supply modules, measuring
modules, foot switches or adapters according to delivery note.
Please check the shipment for completeness and keep the packaging
.
2.2
Fitting the base
Use the Allen key
( included in shipment )
to screw in the screws of the base and set
the column gauge on a solid base.
!!! Do not overtighten screws !!!
2.3 Fitting the IMBus modules
The
C200
column gauge has been developed for use of IMBus modules and allows the connection of 1 to
8 probes, air plug gauges, sensors and digital measuring instruments. The respective modules of the IM-
Bus series can be fitted to the rear panel of the
C200
in order to connect probes, sensors and gauges.
See IMBus Module Overview, chapter 2.12 !!!
2.3.1 Removal of C200 column cover
Use the Allen key
( included in
shipment
)
to loosen and remove both
retaining screws of the column cover.
Then remove the column cover.
4 DIN 7984 M3 x 8
2 DIN 7984 M3 x 8