IBM ZVM - FOR LINUX V6 RELEASE 1, Начало работы

Страница: 72 / 172

Perform these steps to copy the current USER DIRECT file:
1.
Link to MAINT’s 2CC minidisk:
link maint 2cc 2cc mr multiple
2.
Access the 2CC minidisk (MAINT’s 2CC, which is linked to 6VMDIR10):
access 2cc z
3.
Copy MAINT’s USER DIRECT file to 6VMDIR10’s J-disk as USER INPUT:
copy user direct z user input j
4.
Release the linked minidisk:
release z (detach
Continue with the next steps.
Steps for putting the configuration into production and starting
DirMaint
In these steps, you place the DirMaint configuration into production and start
DirMaint.
Before you begin: You need to log onto 6VMDIR10. Later, when you log onto
DIRMAINT, you need to know the log-on password you defined in “Steps for
changing the passwords for DirMaint service machines” on page 52.
Perform these steps to put the configuration into production and start DirMaint:
1.
From the CMS command line, type this command and press the Enter key:
dir2prod prod 6vmdir10 dirm
2.
Log off 6VMDIR10. Type this command and press the Enter key:
logoff
3.
Log onto DIRMAINT.
4.
Start the DirMaint program:
dvhbegin
.
.
.
DVHWAI2140I Waiting for work on 04/02/09 at 18:47:38.
5.
Disconnect DIRMAINT. Type this command and press the Enter key:
cp disc
Continue to the next steps.
58
z/VM: Getting Started with Linux on System z
|
|
|
|