IBM ZVM - FOR LINUX V6 RELEASE 1, Начало работы

Страница: 62 / 172

Before you begin: You need to end CP’s access to the primary parm disk. See
“Steps for releasing the primary parm disk” on page 37.
Perform these steps to update system-wide special escape character defaults:
1.
Edit the SYSTEM CONFIG Z file. Type this command and press the Enter key:
xedit system config z
2.
Find the section entitled “Special characters for system set here.” At the XEDIT
command line, type this command and press the Enter key:
====> /special characters for system set here
3.
Move the cursor to the line with the text “Escape”, then move it to the first
quote mark.
4.
Type “OFF”.
Char_Delete OFF , /* System default ... @ */
Escape OFF , /* System default ... " */
Line_Delete OFF , /* Default is cent sign */
5.
Move the cursor to “Line_End”, and replace “#” with “%”.
Line_End ' % ' , /* System default ... # */
6.
Save the file. At the XEDIT command line, type this command and press the
Enter key:
====> save
You should now see something like this:
SYSTEM CONFIG Z1 F 80 Trunc=80 Size=286 Line=233 Col=1 Alt=0
/**********************************************************************/
/*
Special characters for system set here */
/**********************************************************************/
Character_Defaults ,
Char_Delete OFF , /* System default ... @ */
Escape OFF , /* System default ... " */
Line_Delete OFF , /* Default is cent sign */
Line_End '%' , /* System default ... # */
Tab OFF /* System default ... " */
Steps for checking the syntax of the SYSTEM CONFIG file
Be sure the SYSTEM CONFIG file has the correct syntax by using the CPSYNTAX
command.
Before you begin: You need to end CP’s access to the primary parm disk. See
“Steps for releasing the primary parm disk” on page 37.
Perform these steps to check the syntax of the SYSTEM CONFIG file:
1.
Access the 193 disk as X. From the command line, type this command and
press the Enter key:
48
z/VM: Getting Started with Linux on System z