IBM XSERIES 255 TYPE 8685, Руководство по техническому обслуживанию и ремонту

Страница: 95 / 226

5. Open (to the unlocked position) the memory-board airflow guide away from the
memory-board assembly.
Memory board
Airflow guide velcro
retention tabs
Memory-board
airflow guide
(closed position)
Memory-board
airflow guide
(open position)
Release latch
Release latch
6. Locate the DIMM connectors on the memory board. Determine the DIMM
connectors into which you will install the DIMMs. For more information, see the
notes at the beginning of this procedure.
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
DIMM 7
DIMM 8
DIMM 9
DIMM 10
DIMM 11
DIMM 12
Retaining clips
7. Open the retaining clips located on the ends of the DIMM connector, if
necessary.
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently.
8. Touch the static-protective package that contains the DIMM option to any
unpainted metal surface on the server. Then, remove the DIMM from the
package.
9. Turn the DIMM so that the DIMM keys align correctly with the connector. The
DIMM can be inserted only one way.
10. Insert the DIMM by pressing the DIMM straight into the connector. Be sure that
the retaining clips snap into the closed positions.
Chapter 4. Customer replaceable units
85