IBM XSERIES 255 TYPE 8685, Руководство по техническому обслуживанию и ремонту

Страница: 144 / 226

Note: See “System” on page 160 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
015-xxx-198 (Remote Supervisor Adapter II
installed) or (USB device connected during
USB test)
1. If Remote Supervisor Adapter II is installed as an option,
remove it and rerun test.
Note: If Remote Supervisor Adapter II is present as a standard
installation, do not remove it; the test cannot be run.
2. Remove USB devices from USB1 and USB2; then, rerun test.
3. System board.
020-xxx-000
(Failed PCI interface test)
v
System board
020-xxx-001
(Failed hot-swap slot 1 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-xxx-002
(Failed Hot-swap slot 2 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-xxx-003
(Failed hot-swap slot 3 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-xxx-004
(Failed hot-swap slot 4 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
030-xxx-000
(Failed internal SCSI interface test)
v
System board
035-xxx-099
1. No adapters were found.
2. If adapter is installed re-check connection.
035-xxx-S99
(Failed RAID test on PCI slot S. S =
number of failing PCI slot. Check System
Error Log before replacing a FRU.)
1. Adapter
2. SCSI backplane
3. Cable
035-xxx- snn
(Check System Error Log before replacing
a FRU. s = number of failing PCI slot, nn =
SCSI ID of failing fixed disk.)
v Hard disk drive with SCSI ID nn on RAID adapter in PCI slot s .
035-253-S99
(RAID adapter initialization failure)
1. ServeRAID adapter in slot s is not configured properly. Obtain
the basic and extended configuration status and see the ServeRAID
Hardware Maintenance Manual for more information.
2. Cable.
3. SCSI backplane.
4. Adapter.
075-xxx-000
(Failed power supply test)
v
Power supply
089-xxx-001
(Failed microprocessor test)
1. VRM 1 for microprocessor 1
2. Microprocessor 1
089-xxx-002
(Failed optional microprocessor test)
1. VRM 2 for optional microprocessor 2
2. Optional microprocessor 2
089-xxx-003
(Failed optional microprocessor test)
1. VRM 3 for optional microprocessor 3
2. Optional microprocessor 3
089-xxx-004
(Failed optional microprocessor test)
1. VRM 4 for optional microprocessor 4
2. Optional microprocessor 4
134
xSeries 255 Type 8685: Hardware Maintenance Manual and Troubleshooting Guide