IBM XSERIES 255 TYPE 8685, Руководство по техническому обслуживанию и ремонту

Страница: 112 / 226

normal domestic waste. They will be taken back free of charge by the manufacturer,
distributor, or representative, to be recycled or disposed of in a proper manner.
To order replacement batteries, call 1-800-772-2227 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,
call your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure your server and reset the
system date and time.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water
v Heat to more than 100°C (212°F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Complete the following steps to replace the battery:
1. Review the information in “Before you begin” on page 39, “Handling
static-sensitive devices” on page 40, and “Safety information” on page 167.
2. Follow any special handling and installation instructions supplied with the
battery.
3. Turn off the server and all attached devices and disconnect all power cords
and external cables; then, remove the server cover (see “Removing the top
cover and bezel” on page 49).
4. Disconnect any internal cables as necessary, so that you can access the
battery.
5. If the server does not contain any full-length adapters, continue with the next
step.
If the server contains a full-length adapter in PCI-X slot 2 or 3, you must
remove it. Move the adapter locking lever to the unlocked (open) position on
the adapter-support bracket as indicated by the arrows. Then, remove the
adapters. See “Working with adapters” on page 51 for additional information
about adapters.
6. Locate the battery (connector BH1) on the system board.
102
xSeries 255 Type 8685: Hardware Maintenance Manual and Troubleshooting Guide