IBM WebSphere XS40, Справочник по командам

Страница: 34 / 1066

Related Commands
disable , exit
Examples
v
Exits User Mode and enters Privileged Mode.
> enable
Username: admin
Password: ********
#
exec
Calls and runs a target configuration script.
Syntax
exec URL
Parameters
URL Identifies the location of the configuration file.
v If the file resides on the appliance, this parameter takes the form
directory :/// filename , where:
directory
Identifies a local directory. Generally, the directory is one of the
following keywords:
–
config
–
local
filename
Identifies the file in the directory.
v If the file is remote and the transport protocol is HTTP, HTTPS, SCP, or
SFTP, this parameter takes one of the following forms:
–
http:// user : password @ host / file
– https:// user : password @ host / file
–
scp:// user : password @ host / file
–
sftp:// user : password @ host / file
The host name can be specified as an IP address or as a qualified host
name when DNS services were previously enabled.
Guidelines
The exec command enables the modularity of configuration scripts. For example,
you can include all service configuration commands in a script called
services.cfg
and all Multi-Protocol Gateway configuration commands in the gateway.cfg script.
A main configuration script can consist entirely of a series of exec commands.
Examples
v
Executes the specified configuration scripts.
# configure terminal
# exec config:///housekeeping.cfg
# exec config:///interfaces.cfg
# exec config:///crypto.cfg
# exec config:///services.cfg
#
8
Command Reference