IBM WebSphere XS40, Справочник по командам

Страница: 356 / 1066

Note: Users should consider security implications before revealing software
version information.
Use the no identifier command to suppress the
Server
response header field.
Examples
v
Specifies
Release 3.7.1
as the contents of the
Server
response header field.
# identifier "Release 3.7.1"
#
v Suppresses the transmission of the Server response header field.
# no identifier
#
ip-address
Specifies the local IP address to monitor for incoming traffic.
Syntax
ip-address { address | 0 }
Parameters
address Specifies the IP address (primary or secondary) of a DataPower Ethernet
interface.
0 Indicates all DataPower Ethernet interfaces.
Guidelines
In conjunction with the port command, identifies the IP addresses and ports that
the HTTP service monitors.
Related Commands
port
Examples
v
Specifies
10.10.13.35:23000
as the local IP address-port that the current HTTP
service monitor.
# http telnet-1
Telnet Service configuration mode
# ip-address 10.10.13.35
# port 23000
#
local-directory
Specifies the directory from which the HTTP service serves documents.
Syntax
local-directory
{
config:
|
image:
|
store:
|
temporary:
}
Parameters
config:
Serves documents from the configuration (config:) directory
330
Command Reference