IBM WebSphere XS40, Справочник по командам

Страница: 121 / 1066

var://system
Specifies the required prefix that identifies a global variable.
contextName
Specifies the required name of the context within which the global
variable resides.
value Specifies the value to assign.
Guidelines
The set-system-var command creates a new system variable that actions or style
sheets can access with the
dp:variable()
function. System variables, while globally
accessible, must be defined within a specified context.
For example
var://system/Notes/jim
is correct as it sets the variable
jim
in the
context
Notes
within the
system
scope.
However,
var://system/Notes
and
var://system/Notes/
are incorrect as they
specify only a scope and context, but not a variable.
Examples
v Creates the counter system variable in the signerID context.
# set-system-var var://system/signerID/counter 0
#
simple-rate-limiter
Enters Simple Rate Limiter configuration mode.
Syntax
simple-rate-limiter name
no simple-rate-limiter name
Parameters
name Specifies the name of the Simple Rate Limiter.
The name can contain a maximum of 128 characters. For restrictions, refer
to “Object name conventions” on page xxiv.
Guidelines
The simple-rate-limiter command enters Simple Rate Limiter configuration mode.
In this mode, you can create a Simple Rate Limiter. A Simple Rate Limiter is used
by a Web Application Firewall.
Use the cancel or exit commands to exit Simple Rate Limiter configuration mode
and return to Global configuration mode.
Use the no simple-rate-limiter command to delete a Simple Rate Limiter.
Related Commands
cancel , exit
Chapter 2. Global configuration mode
95