IBM WebSphere XS40, Справочник по командам

Страница: 112 / 1066

Syntax
rmdir local:/// subdirectory
Parameters
local:/// subdirectory
The subdirectory to remove from the local: directory.
Guidelines
The rmdir command removes subdirectories from the local: directory.
Related Commands
mkdir
Examples
v
Deletes the
stylesheets
subdirectory and all its contents from the
local:
directory.
# rmdir local:///stylesheets
Removing 'local:///stylesheets' will delete all files
including subdirectories!
Do you want to continue? [y/n]:y
Directory 'local:///stylesheets' successfully deleted.
#
rollback chkpoint
Loads a checkpoint configuration file as the running configuration.
Syntax
rollback chkpoint name
Parameters
name Specifies the name of the checkpoint configuration file.
Guidelines
The
rollback chkpoint
command reverts the running configuration to the
configuration that is defined in the named checkpoint configuration file.
Note: If you use the rollback chkpoint command after a configuration was
persisted with the write memory command, the appliance uses the
configuration in the checkpoint configuration file, not the configuration in
the startup configuration file. Before reverting to a checkpoint configuration,
you might want to compare the timestamp on the checkpoint configuration
file the startup configuration file. If the startup configuration file is more
recent than the checkpoint configuration file, you might want to validate the
differences to ensure that a necessary configuration change is forgotten.
Related Commands
rollback chkpoint , save chkpoint , show chkpoints , write memory
Examples
v
Reverts to the configuration in the
foo
checkpoint configuration file.
86
Command Reference