IBM WebSphere XS40, Справочник по командам

Страница: 747 / 1066

Chapter 88. User configuration mode
This chapter provides an alphabetic listing of commands that are available in User
configuration mode.
To enter this configuration mode, use the Global user command.
Many of the commands that are listed in “Common commands” on page 2 and
most, but not all, of the commands that are listed in Chapter 114, “Monitoring
commands,” on page 949 are also available in User configuration mode.
access-level
Assigns an account type of an account.
Syntax
access-level { privileged | user }
Parameters
privileged
Assigns executive access to the account. A privileged account has virtually
the same access levels as the
admin
account. It differs only in that a
privileged account cannot delete the
admin
.
user Assigns restricted access to the account. A user account is limited to the
common commands and most, but not all of the
show commands.
Guidelines
By default, newly created accounts are assigned the user access level.
Related Commands
group
,
password
domain
Restricts access to specific application domains.
Syntax
domain [ name ]
Parameters
name Specifies the name of an existing Application Domain object.
Guidelines
The domain command restricts access to the list of specific domains. Without at
least one application domain, the user can log in to any domain on the appliance.
This command is valid in the following situations only:
v
The user is not a member of a user group.
© Copyright IBM Corp. 1999, 2008
721