IBM WebSphere XS40, Справочник по командам

Страница: 310 / 1066

move
Moves a file from one directory to another.
Syntax
move [ -f ] source destination
Parameters
-f Overwrites an existing file, if one of the same name already exists.
In the absence of this argument, an attempt to save a file with the same
name as an existing file results in a prompt that requests confirmation to
overwrite the existing file.
source and destination
Specifies the URLs that identify the source file and target destination,
respectively. These arguments take the following form:
directory :/// filename
directory
Specifies a directory on the appliance. Refer to “Directories on the
appliance” on page xxii for details.
filename
Specifies the name of a file in the specified directory.
Guidelines
You can use the move command to transfer a file to or from a directory. However,
you cannot use the move command to copy a file from the private cryptographic
area (such as the cert: directory).
Related Commands
copy , delete , dir
Examples
v
Moves a file from the
config:
directory to the
store:
directory.
# move config:///startup-config store:///archiveConfig-10
#
v
Renames a file.
# move config:///startup-config config:///archiveConfig-10
#
reinitialize
Returns the appliance to a manufactured state.
Syntax
reinitialize filename
284
Command Reference