IBM WebSphere XS40, Справочник по командам

Страница: 306 / 1066

Guidelines
After opening the newly created or existing configuration, the command prompts
for command input:
Enter startup commands, one per line. End with a period.
Enter commands, terminating each command by pressing the Return or Enter key.
If appending commands to an existing configuration, make certain to start with
appropriate commands to transition to the correct configuration mode.
Follow the last command of the configuration with the following sequence to
signal the end of the configuration:
Return
. (period)
Return
The CLI acknowledges configuration completion:
Configuration completed successfully.
After configuration completion you can use the boot config and shutdown
commands to activate the new or edited configuration.
Related Commands
boot config , boot image , shutdown
Examples
v
Creates a new configuration,
jrb_03.cfg
. If it exists, erases and opens the file.
# boot update write jrb_03.cfg
Enter startup commands, one per line. End with a period.
v
Opens an existing configuration,
jrb_03.cfg
, to which commands will be
appended.
# boot update append jrb_01.cfg
Enter startup commands, one per line. End with a period.
copy
Copies a file to or from the DataPower appliance.
Syntax
copy [ -f ] source destination
Parameters
-f Overwrites an existing file, if one of the same name already exists. In the
absence of this argument, an attempt to save a file with the same name as
an existing file will result in a prompt that requests confirmation to
overwrite the existing file.
source and destination
Specifies the URLs that identify the source file and target destination,
respectively.
v
If the source file or target destination reside on the appliance, these
arguments take the following form:
280
Command Reference