IBM WebSphere XS40, Справочник по командам

Страница: 317 / 1066

Related Commands
processing-seize-pattern
result
Indicates whether to create a response file after processing an input file.
Syntax
result { on | off }
Parameters
on (Default) Creates a result file.
off Does not create a result file.
Guidelines
The result command indicates whether the appliance should create a response file
after successfully processing an input file.
result-name-pattern
Specifies the match pattern to build the name of the response file.
Syntax
result-name-pattern pattern
Parameters
pattern Specifies the PCRE to use as the match pattern to build the name of the
response file.
Guidelines
The result-name-pattern command specifies the PCRE to use as the match pattern
to build the name of the result file. This PCRE will normally have a back reference
to the base input file name. For instance, in input files are
NNNNNN.input
and the
desired result file name is
NNNNNN.result
, then the match pattern would be
([0-9]{6})\.input$
and the result pattern would be
$1.result
.
Some servers might allow this pattern to indicate a path that puts the file in a
different director, if it allows cross-directory renames. For instance, the match
pattern would be
(.*)
and the result pattern would be
../result/$1
.
This command is relevant when result is on . Otherwise, it is ignored.
PCRE documentation is available at the following web site:
http://www.pcre.org
Related Commands
result
Chapter 21. FTP Poller Front Side Handler configuration mode
291