IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Страница: 32 / 248

Attention: Each configured IP address on the same server needs to be on a
different subnet, and each subnet needs to be on a different VLAN. If separate
subnets and VLAN’s are not used, in certain environments and networks, network
packets can move to other subnets, which can harm network performance and
potentially reduce the network's quality of service.
In addition, each virtual interface containing more than one physical interface
(configured as a bond) needs to be configured with a load balancing method. For a
server with 10 Gb interfaces, where bonding is implemented, the recommended
load balancing method is Link Aggregation Control Protocol (LACP) with L3L4.
For more information about bonding, the different load balancing methods, and
whether to configure bonds at all, refer to the IBM ProtecTIER Implementation and
Best Practices, Redbooks publication SG24-8025, available at: http://
www.redbooks.ibm.com/Redbooks.nsf/RedpieceAbstracts/sg248025.html?Open or
the IBM ProtecTIER Implementation and Best Practices, Redbooks publication
SG24-8025, available at: http://www.redbooks.ibm.com/Redbooks.nsf/
RedpieceAbstracts/sg248025.html?Open.
The following procedure describes how to perform the tasks described in the
previous paragraph.
Procedure
1. On the server, if it is not already displayed, access the ProtecTIER Service
menu. See “Accessing the ProtecTIER Service menu” on page 9.
2. Select the ProtecTIER Configuration (...) option. Type the corresponding
number and press <enter> . The ProtecTIER Configuration (...) menu is
displayed.
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
ProtecTIER Configuration (...)
----------------------------------------------------------------------
1) Configure ProtecTIER node
2) Recover Configuration for a replaced server
3) Configure machine serial number for a replaced server
4) Configure RAS
5) Update Time, Date, Timezone & Timeserver(s)
6) Scan storage interconnections
7) File Systems Management (...)
8) Configure replication (...)
9) IP Network configuration (...)
10) Update Firmware (...)
11) Update the system’s name
12) Validate configuration
13) Single Node - code upgrade
14) OS images Management (...)
15) Replace SAS drive
B) Back
E) Exit
----------------------------------------------------------------------
>>> Your choice?
3. Select the IP Network configuration (...) option. Type the corresponding
number and press Enter. The IP Network configuration (...) menu is
displayed:
12
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems