IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Страница: 29 / 248

Chapter 2. Completing the ProtecTIER system setup for new
installations
This chapter details the prerequisites for completing the ProtecTIER system setup
for new installations. Configuring the node is described in the IBM TS7650G
ProtecTIER Deduplication Gateway Installation Roadmap Guide, GA32-0921.
If you are upgrading the ProtecTIER system, refer to the IBM TS7650 ProtecTIER
Software Upgrade Guide, SC27-3643.
Use the ProtecTIER Service menu to complete the ProtecTIER configuration process
that was started in manufacturing. If you are working on a TS7650G, some or all of
these configurations may have already been done during the node configuration.
Note: Throughout this chapter the terms server and node are used
interchangeably, depending upon the task being performed.
Accessing the ProtecTIER Service menu
Complete this task to access the ProtecTIER Service menu.
Procedure
1. If you are in a single node configuration, connect the USB keyboard and
graphics-capable monitor to the server.
2.
Verify that the server is running:
3. At the localhost Login prompt, type ptconfig and press Enter.
4. At the Password prompt, type
ptconfig
and press Enter.
The ProtecTIER Service Menu opens:
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER analysis (...)
E) Exit
----------------------------------------------------------------------
>>> Your choice?
5. Go on to “Customizing the ProtecTIER server”
Customizing the ProtecTIER server
Complete this task to customize the ProtecTIER server.
© Copyright IBM Corp. 2012, 2016
9