IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 47 / 248

v In an existing Program Group - Adds the shortcut to an existing program
group in the Program list of the Start menu.
v In the Start Menu
v On the Desktop
v In the Quick Launch Bar
v Other - Enables you to enter a path location for the shortcut, or to browse
for a location by clicking Choose.
v Don't create icons - No shortcuts are created.
Note: When relevant, you can select Create Icons for All Users to create a
shortcut in the defined location for all user accounts on the workstation.
7. Click Next.
The Pre-Installation Summary screen displays the Install and Shortcut folder
locations and the disk space information of the target for installation.
8.
Review the Summary screen, and click Install to start the installation.
The Installing ProtecTIER Manager screen is displayed.
9. When the installation is complete and ProtecTIER Manager has been
successfully installed, click Done.
The ProtecTIER Installation wizard closes and the installation process is
complete.
What to do next
Go on to the next chapter.
Installing on Linux
Complete this task to install ProtecTIER Manager on a Linux system.
About this task
Perform the following steps to install ProtecTIER Manager on Linux:
Procedure
1. Insert the IBM ProtecTIER Manager DVD into the CD-ROM drive of the
designated ProtecTIER Manager workstation.
2. Run the ProtecTIER Manager installer.
Note: This procedure presumes that the workstation has a Linux graphical
interface which is required for ProtecTIER Manager.
a. From the Linux Desktop, select and open the CD drive icon.
b. Select and open the folder for your Linux version: Linux for version 64 or
Linux32
for version 32.
c. When the folder opens, drag the InstallLinuxXX.bin file from the folder to
the Desktop. (XX=either 32 or 64, depending on the Linux folder that you
selected.)
d. Close the open windows.
e. Right-click on an open area of the Desktop, and from the menu options
displayed, select Open Terminal.
f.
At the Terminal command prompt, use the following command to change
to the Desktop directory (Note: Desktop is case-sensitive. Type it using a
capital "D".):
Chapter 4. Installing ProtecTIER Manager
27