IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя

Страница: 33 / 248

----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
ProtecTIER Configuration (...)
IP Network Configuration (...)
----------------------------------------------------------------------
1) Configure hostname
2) Configure ProtecTIER’s IP interfaces
3) Configure Static Routes
4) Configure Baseboard Management Controller (BMC) IP
5) Configure RAS switch
B) Back
E) Exit
----------------------------------------------------------------------
>>> Your choice?
4. Select the Configure ProtecTIER’s IP interfaces option. Type the
corresponding number and press Enter.
The system displays the corresponding output. As an example:
# Interface L/B Method IP Address Netmask Devices
1 external HA 9.148.220.154 255.255.252.0 eth0
2 replic1 HA 192.168.20.1 255.255.255.0 eth3
3 replic2 HA 192.168.21.1 255.255.255.0 eth4
4 unassigned HA
Available Options:
==================
(e)edit a virtual interface
(r)re-assign a physical interface
(c)commit changes
(q)quit
Please Choose (e,r,c,q):
5. To edit the virtual interface, type
e
and press Enter.
The following is displayed:
Please choose the ID of the virtual interface you wish to edit:
6. Choose a virtual interface to edit and type the requested information at each
prompt. For example, type
1
and press Enter:
Available Options:
==================
(e)edit a virtual interface
(r)re-assign a physical interface
(c)commit changes
(q)quit
Please Choose (e,r,c,q): e
Please choose the ID of the virtual interface you wish to edit: 1
The system displays the available load balancing methods:
Available Load Balancing methods are:
RR, L3L4, L2L3, L2, HA
Choose a Load Balancing method [HA]: (for example: HA)
IP Address for external [9.148.220.154]: (for example: 9.148.220.154)
Netmask for external [255.255.255.0]: (for example: 255.255.255.0)
Gateway for external [9.148.220.4]: (for example: 9.148.220.4)
Hostname for external [minsk]:(for
example: minsk)
Note: For more information about the load balancing methods, refer to “FSI
network configuration for the ProtecTIER backup server” on page 71.
7. If you want to reassign a physical interface, type
r <enter>
.
Chapter 2. Completing the ProtecTIER system setup for new installations
13