IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, Руководство пользователя, Страница: 165 / 248

Chapter 16. Reporting
The topics in this section describe how to create and generate various reports from
the ProtecTIER system using ProtecTIER Manager.
Simple Network Management Protocol (SNMP), when it is configured on a
ProtecTIER system, can be used to send a problem notification in the event of
hardware or software degradation or failure to designated recipients.
Using SNMP traps
About this task
In the event of hardware or software degradation or failure, ProtecTIER systems
which are configured to use Simple Network Management Protocol (SNMP) can
send a problem notification to designated recipients. SNMP notifications, or traps,
can be sent even if the ProtecTIER Manager interface is unavailable.
To use SNMP traps you need the following items:
v SNMP trap receiver software installed on an SNMP trap server. Follow the
instructions from the manufacturer to install and configure the SNMP trap
receiver software.
v The file name and location of the management information base (MIB) file for
the SNMP trap receiver. On the ProtecTIER server, the file name is:
IBM-TS7600-SNMP-MIBV2.mib
located in:
/usr/share/snmp/mibs
. The full path is:
/usr/share/snmp/mibs/IBM-TS7600-SNMP-MIBV2.mib
.
v The IBM-TS7600-SNMP-MIBV2.mib file needs to be copied onto the SNMP trap
receiver and the trap receiver software must point to the directory location of the
MIB file for translation of the trap messaging.
v SNMP trapping enabled on one or more of your ProtecTIER servers. For 3958
DD6, 3958 DD5, and 3958 DD4 servers, see the IBM ProtecTIER User's Guide for
VTL Systems, GA32-0922.
The ProtecTIER servers have the following improvements in SNMP support.
v ProtecTIER software events that send specific notifications based on the error
that occurred.
v ProtecTIER hardware events that trigger specific notifications are based on the
error that occurred, such as a CPU event or power event.
v Send enough detailed information with the SNMP notification so that you can
understand the problem. The ProtecTIER Manager Configuration menu gives
you the option to filter SNMP traps based on severity.
– Error-level severities can be filtered by:
- Error
- Warning
- Information
- Software error categories include:
v VTL
v Replication
v Repository storage
© Copyright IBM Corp. 2012, 2016
145