IBM System x3750 M4 Type 8733, Инструкция по установке и обслуживанию

Страница: 151 / 694

The Update
Xpress
System Pack Installer
The Update Xpress System Pack Installer detects supported and installed device
drivers and firmware in the server and installs available updates. For additional
information and to download the Update
Xpress System Pack Installer, go to the
ToolsCenter for System x and BladeCenter at http://publib.boulder.ibm.com/
infocenter/toolsctr/v1r0/index.jsp and click
UpdateXpress System Pack Installer .
Using the integrated management module
The integrated management module II (IMM2) is a second generation of the
functions that were formerly provided by the baseboard management controller
hardware. It combines service processor functions, video controller, and remote
presence function in a single chip.
For more information about IMM2, see the Integrated Management Module II User's
Guide at http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-
5089484.
The IMM supports the following basic systems-management features:
v
Active Energy Manager.
v
Alerts (in-band and out-of-band alerting, PET traps - IPMI style, SNMP, email).
v
Auto Boot Failure Recovery (ABR).
v
Automatic microprocessor disable on failure and restart in a
multi-microprocessor configuration when one microprocessor signals an internal
error. When one of the microprocessors fail, the server will disable the failing
microprocessor and restart with the other microprocessors.
Note: When one microprocessor fails in a four-microprocessor configuration,
two microprocessors will be disabled.
v
Automatic Server Restart (ASR) when POST is not complete or the operating
system hangs and the operating system watchdog timer times out. The IMM
might be configured to watch for the operating system watchdog timer and
reboot the system after a timeout, if the ASR feature is enabled. Otherwise, the
IMM allows the administrator to generate a nonmaskable interrupt (NMI) by
pressing an NMI button on the rear of the server for an operating-system
memory dump. ASR is supported by IPMI.
v
Remote presence support (remote video, remote keyboard/mouse, and remote
storage).
v
Boot sequence manipulation.
v
Command-line interface.
v
Configuration save and restore.
v
DIMM error assistance. The Unified Extensible Firmware Interface (UEFI)
disables a failing DIMM that is detected during POST, and the IMM lights the
associated system error LED and the failing DIMM error LED.
v
Environmental monitor with fan speed, temperature, voltages, fan failure, power
supply failure, and power backplane failure.
v
First Failure Data Capture (FFDC) support.
v
Intelligent Platform Management Interface (IPMI) Specification V2.0 and
Intelligent Platform Management Bus (IPMB) support.
v
Invalid system configuration (CONFIG) LED support.
Chapter 3. Configuration information and instructions
135