IBM SelectaDock III, Руководство пользователя

Страница: 98 / 134

Wake-up on LAN problems
Problem Action
The system does not
wake on when using
Wake-on LAN adapter
installed even when
Wake-on Packed
provided. Verify that:
1. The type of computer is correct. Only a ThinkPad 770 computer
supports this feature.
2. The LAN adapter card in the slot of the SelectaDock system
supports the Wake-up LAN feature.
3. The LAN cable is connected to the LAN adapter.
4. Both the power code and the Wake-up signal code is connected
to the LAN adapter used for the Wake-up operation.
5. AC power is supplied to the computer when it is powered off.
To operate the Wake-up feature, ac power must be supplied to
the computer when it is turned off.
6. The Wake-up feature is enabled.
Intermittent Problems
Problem Action
An intermittent problem
occurs. The problem can be difficult to analyze because it occurs just once in
a while. If your SelectaDock system has such a problem, verify that:
1. The computer is firmly attached to the SelectaDock system.
2. All cables and power cords are securely connected to the
SelectaDock system and to the attached options.
3. The SCSI drive is correctly terminated.
If these items are correct and the problem still occurs, write down
what the problem is and what the system was doing when the
problem occurred. Then contact your place of purchase or service
representative for help.
6-20
IBM ThinkPad SelectaDock III User's Guide