IBM SelectaDock III, Руководство пользователя

Страница: 51 / 134

5
Reboot the computer to make the change effective.
You have finished the setup.
For Windows 3.1, Windows NT, Windows 95, or OS/2 Warp
For the ThinkPad 760 and 765 user, do as follows:
1
Select the ThinkPad folder.
2
Select the ThinkPad Configuration icon.
3
Click on the Docking Station ( ) button.
4
Select Enable IDE device.
5
Click on OK; then close the ThinkPad Configuration program.
6
Reboot the computer to make the change effective.
For the ThinkPad 770 with Windows 95 user, do as follows:
1
Click on Start, move the cursor over Program, and ThinkPad,
and click on ThinkPad Configuration.
2
Click on the Docking Station ( ) button.
3
Set only the 1st IRQ in the next window.
4
Click on OK; then close the ThinkPad Configuration program.
5
Reboot the computer to make the change effective.
6
Select the ThinkPad folder.
Note:
Do not use IRQ 11 and IRQ 15. You have to disable a
device or port to set an IRQ for the SelectaDock III system.
When you select an IRQ, a hardware conflict message
appears. Disable the device currently assigned to that IRQ.
Chapter 3. System Configuration
3-3