IBM SelectaDock III, Руководство пользователя

Страница: 93 / 134

UltraBay II Device Problems
Problem Action
The CD-ROM drive, DVD
drive, or diskette drive in
the UltraBay II does not
work. Verify that:
1. The drive is engaged firmly to the UltraBay II connector. Remove
and reinstall the drive.
“Installing a Device in the UltraBay II Tray” on page 2-6
2. The drive works correctly if installed in the computer's UltraBay II.
3. The drive works correctly when the drive test is run.
“Running Tests” on page 6-22 .
4. Correct setup (including resource assignment and device driver
installation) was done when you installed the device.
5. No more than two IDE devices are installed, including a device in
the device space.
The hard disk drive in the
UltraBay II does not work. Verify that:
1. The drive is connected firmly in the UltraBay II connector.
Remove and reinstall the drive.
“Installing a Device in the UltraBay II Tray” on page 2-6
2. The drive works correctly if installed in the computer's UltraBay II.
3. The drive works correctly when running drive tests.
“Running Tests” on page 6-22 .
4. The hard disk password is correctly set. User's guide of
your computer for instructions to set the password.
Chapter 6. Troubleshooting
6-15