IBM SelectaDock III, Руководство пользователя

Страница: 97 / 134

Adapter Problems
Problem Action
The adapter does not
work. Verify that:
1. The adapter is designed for the SelectaDock system adapter slot.
2. You followed all the installation instructions described in
“Installing a PCI or an ISA Adapter Card” on page 2-13.
3. The system resources are assigned correctly by its utility
program, if the adapter card is a non-PnP ISA adapter bus type.
4. The driver disk is up to date. Contact the driver manufacturer.
The accompanying disk may support only older desktop
computers.
See the adapter documentation that came with the option to diagnose
problems.
USB Port Problems
Problem Action
A connected USB device
does not work. Verify that:
1. The USB device is connected correctly.
2. The USB device correctly installed in the computer. If not, see
the troubleshooting section of the ThinkPad user's guide first.
3. The USB device is set up correctly, including the computer
resource assignment and device driver installation.
Open the System Properties window to see the resource conflict.
Note:
To open this window, double-click on My Computer,
Control Panel, and System; then click on the Device
Manager tab.
Run the diagnostic test for USB port.
“Internal Drive Test” on page 6-22
Chapter 6. Troubleshooting
6-19