IBM SelectaDock III, Руководство пользователя

Страница: 75 / 134

Item Hints and Tips
Installing OS/2 Warp To install OS/2 Warp from a SCSI CD-ROM drive that is
connected to the SelectaDock SCSI connector, do as follows:
1
Make a copy of Diskette 1 of the operating system:
a) Insert Diskette 1 and a blank diskette in drives A and B.
b) Type the following command at the command prompt
screen:
diskcopy a: b:
c) Press Enter.
2
Copy AIC7870.ADD from the SelectaDock Option Diskette
to the root directory of the copied Diskette 1. The root
directory is the first directory on the diskette. AIC7870.ADD
overwrites any existing versions of the device drivers
included on the copied Diskette 1.
3
Start installation by inserting the Installation Diskette into
drive A and restarting the system. When prompted to insert
Diskette 1, insert the copy that you created.
4
Follow the instructions in the OS/2 Warp User's Guide to
complete the installation of OS/2 Warp.
Installing Windows NT To install the Windows NT, see the relevant ThinkPad online
book.
Using the SCSI device driver
bundled with Windows 95 The SCSI device driver bundled with Windows 95 does not
support the suspend and resume function. When you use such
SCSI devices, you must disable suspend and hibernation as
follows:
1
Open the ThinkPad Configuration folder, and click on the
Docking Station ( ) button.
2
Deselect Suspend/hibernate while docked if it has been
selected.
3
Click on OK to close the ThinkPad Configuration program.
Chapter 5. Hints, Tips, and Limitations
5-3