IBM SelectaDock III, Руководство пользователя

Страница: 24 / 134

Detaching the SelectaBase from the SelectaDock III system
To disassemble the SelectaDock system, do as follows:
Note:
The picture shows a SelectaBase 770 port replicator. To
detach the SelectaDock Base Model I to the SelectaDock III
system, do the same procedure.
1
Remove the connector cover.
2
Disconnect all peripheral cables from the SelectaDock system.
3
Disconnect the power cord from the SelectaDock system.
4
Unlock the port replicator from the SelectaDock III system by
sliding the lock downward.
5
Set the security key to the unlock position
1
; then release the
port replicator
2
.
Note:
Use the finger hole as shown in the figure when you
release the port replicator.
6
Attach the connector cover to the SelectaDock III system
You have completed disassembling the SelectaDock system.
1-14
IBM ThinkPad SelectaDock III User's Guide