IBM Power System 8335-GCA, Руководство пользователя

Страница: 94 / 174

Table 22. Sensor information, event description, and service action for the 8335-GTB (continued)
Sensor name (Sensor ID) Event description Service action
v Quick Pwr Drop 1 (0xDE)
v Quick Pwr Drop 2 (0xE2)
State Deasserted No service action is required.
State Asserted
v Ensure that ac power is supplied
to the rack.
v Ensure that the power supply
cords are plugged tightly into the
power supplies and the rack PDU
unit.
v Check for service action required
SEL events for the power supply
sensor. If any exist, follow the
service action that is specified in
“Identifying a service action by
using sensor and event information
for the 8335-GTB” on page 57.
Water Cooled (0xE3) None No service action is required.
CPU 1 VDD Temp (0xE4) Upper Critical - going high If the system is a water-cooled
system, go to “Resolving an over
temperature problem for a
water-cooled 8335-GTB system” on
page 26. If the system is an air-cooled
system, ensure that there are no air
flow obstructions at the front or at
the rear of the system. Ensure that
the fans are operating properly.
CPU 2 VDD Temp (0xE5) Upper Critical - going high If the system is a water-cooled
system, go to “Resolving an over
temperature problem for a
water-cooled 8335-GTB system” on
page 26. If the system is an air-cooled
system, ensure that there are no air
flow obstructions at the front or at
the rear of the system. Ensure that
the fans are operating properly.
Identifying a service action by using sensor and event information for the
8348-21C
You can use the sensor and event information from the system event log to determine a service action to
perform for the IBM Power System S812LC (8348-21C).
If you have not done so already, complete “Identifying a service action by using system event logs” on
page 27. Then, use the following table to determine the service action to perform.
78
Problem analysis, system parts, and locations for the 8335-GCA, 8335-GTA, 8335-GTB, and 8348-21C