IBM Power System 8335-GCA, Руководство пользователя

Страница: 71 / 174

Table 21. Sensor information, event description, and service action for the 8335-GCA and 8335-GTA (continued)
Sensor name (Sensor ID) Event description Service action
v PSU Fault 1 (0xCD)
v PSU Fault 2 (0xCE)
Power Supply Failure Detected An assert event immediately
followed by a deassert event
indicates that a power cycle of the
system occurred. No service action is
required. If there is no deassert event
immediately following the assert
event, replace the power supply. If
the sensor name is PSU Fault 1,
replace PSU 1. If the sensor name is
PSU Fault 2, replace PSU 2. Go to
“8335-GCA and 8335-GTA locations”
on page 111 to identify the physical
location and removal and
replacement procedure.
v Predictive Failure
v Power Supply Input Out of Range
But Present
If the sensor name is PSU Fault 1,
replace PSU 1. If the sensor name is
PSU Fault 2, replace PSU 2. Go to
“8335-GCA and 8335-GTA locations”
on page 111 to identify the physical
location and removal and
replacement procedure.
v
Power Supply Input Lost or AC
DC
v Power Supply Input Lost Or Out
Of Range
Ensure that ac power is supplied to
the rack. Ensure that the system
power cords are plugged tightly into
both the power supply and the rack
PDU unit for both system power
supplies. Go to “8335-GCA and
8335-GTA locations” on page 111 to
identify the physical location and
removal and replacement procedure.
Configuration Error Ensure that both power supplies are
securely seated in the system. Go to
“8335-GCA and 8335-GTA locations”
on page 111 to identify the physical
location and removal and
replacement procedure.
v Presence Detected
v Power Supply Inactive
No service action is required.
Beginning troubleshooting and problem analysis
55