IBM Power System 8335-GCA, Руководство пользователя

Страница: 75 / 174

Table 22. Sensor information, event description, and service action for the 8335-GTB (continued)
Sensor name (Sensor ID) Event description Service action
FW Boot Progress (0x05)
v System Firmware Error
v System Firmware Hang
SEL events with OEM record c0 |
000e000 | 3a150
xxxxxxx indicate that
a boot failed. Search for boot failure
SEL events that have a time stamp
close to the time stamp of this SEL
event. If events exist, go to
“Resolving a system firmware boot
failure” on page 4.
System Firmware Progress No service action is required.
v OCC 1 Active (0x08)
v OCC 2 Active (0x09)
Device Disabled If the sensor name is OCC 1 Active,
replace CPU 1. If the sensor name is
OCC 2 Active, replace CPU 2. Go to
“8335-GTB locations” on page 121 to
identify the physical location and
removal and replacement procedure.
v State Deasserted
v Device Enabled
No service action is required.
Ambient Temp (0x0A)
v Upper Critical - going low
v Lower Non-critical – going low
v Lower Non-critical – going high
v
Lower Critical – going high
v
Lower Non-recoverable – going
low
v Lower Non-recoverable – going
high
v Upper Non-critical – going low
v Upper Non-critical – going high
v Lower Critical - going low
v Upper Non-recoverable – going
low
v Upper Non-recoverable – going
high
No service action is required.
Upper Critical - going high Ensure that the room temperature
meets the requirements that are
specified for the system. Ensure that
no obstructions are blocking air flow
to the system.
Beginning troubleshooting and problem analysis
59