IBM NetVista N2200w, Справочное руководство

Страница: 25 / 102

2. Set the number of minutes before launching the screen saver.
3.
Click OK to save your changes, and reboot your NetVista thin client.
Follow these steps to configure a power down delay for your monitor:
1. Select Enable Video Power Down.
2. Set the number of minutes before your monitor powers down.
3. Click OK to save your changes, and reboot your NetVista thin client.
Note: The Video Power Down option is only available when the screen saver is
enabled.
Network tab
You can set the network information for your NetVista thin client on the Network
tab.
Follow these steps to set the network information:
1. Select one of the following options:
v
Specify an IP address from a DHCP server.
a. Enter a valid terminal name for your NetVista thin client. Valid terminal
names are restricted to 8 alphanumeric characters.
The IP address is displayed in the IP assigned by DCHP Server text box.
v
Specify an IP address.
a.
Enter the correct values in the required fields.
b. Enter a valid terminal name for your NetVista thin client. Valid terminal
names are restricted to 8 alphanumeric characters.
c. To configure the network name resolution for your NetVista thin client,
click Advanced Network.
1) Check either DNS or WINS or both.
2) Enter the correct values in the required fields, and click OK.
2. Click OK again to save your changes and close the Terminal Properties
window.
3. Select one of the following when prompted to reboot:
a.
Click Yes to reboot your NetVista thin client.
b. Click No to continue.
If your NetVista thin client obtains its IP address from a DHCP server, you can
release the IP address assigned to your NetVista thin client by clicking Renew IP
Address
. You should renew the IP address of your NetVista thin client if you move
it from one subnet to another when you use DHCP.
Web tab
You can set the local Internet Explorer web browser window settings on the Web
tab. You can also enable or disable a web browser from this tab.
v
If you want to enable a web browser, ensure a check is in the Enable web
connection
checkbox on the Web tab.
v
If you want to disable your web browser, uncheck the Enable web connection
checkbox on the Web tab.
To set your web browser settings:
Configuring your thin client
13