IBM NetVista N2200w, Справочное руководство

Страница: 19 / 102

Startup sequence
This is a typical startup sequence of events for your NetVista thin client. If any of
these events do not occur, see “Resolving hardware problems” on page 49.
1. The following devices show LED indications:
v
Logic unit (system LED and network status LED)
v
Power supply
v
Keyboard
v
Monitor
1
v
Any USB devices
2
2. The following internal hardware components initialize:
v
Memory
v
L1 cache
v
Video memory
v
Keyboard controller
3. The IBM NetVista thin client screen appears on your monitor.
4. The NetVista thin client detects the CompactFlash card, and loads the operating
system into memory.
5. One of the following appears:
v
The WBT Setup Wizard appears in any of the following situations:
– You start your NetVista thin client for the first time.
– You reset your NetVista thin client to the factory-default property settings.
Refer to “Configuring your thin client” on page 9 for more information on
completing the WBT Setup Wizard.
v
The Terminal Connection Manager window appears.
Refer to the following sections for more information on working with your
NetVista thin client:
– “Configuring your thin client” on page 9
– “Working with the Terminal Connection Manager” on page 33
– “Updating your software” on page 43
v
If a boot interruption screen appears, see “Resolving hardware problems” on
page 49.
1. Refer to the documentation for your monitor if there is no LED indication.
2. Refer to the documentation for your USB devices if there are no LED indications.
© Copyright IBM Corp. 2000, 2001
7