IBM Netfinity 5100 8658 21Y, Руководство пользователя

Страница: 99 / 246

CAUTION:
The following label indicates a hot surface nearby.
b. Remove the defective power supply by placing the
handle on the power supply in the open position
(perpendicular to the power supply) and pulling the
power supply from the bay.
3. If you are replacing the power supply with another one,
go to step 4. Otherwise, continue with step 3a.
a. Install a power-supply filler panel.
Note: During normal operation, each power-supply
bay must have either a power supply or filler
panel installed for proper cooling.
b. Open the cable-restraint bracket and remove the
power cord from the cable-restraint bracket. Close
the cable-restraint bracket.
c. Unplug the power cord from the electrical outlet.
d. Continue with step 5.
4. If you are replacing the power supply:
a. Place the handle on the replacement power supply
in the open position; then, slide the power supply
into the chassis.
b. Gently close the handle on the power supply to
seat the power supply in the bay.
c. Plug the power cord for the power supply into the
power cord connector.
d. Verify that the AC Power light and DC Power light
are lit, indicating that the power supply is operating
correctly.
5. If you have other options to install or remove, do so
now; otherwise, go to “Installing the cover” on page 92.
Removing the only power supply
To remove the only power supply:
1. Turn off the server and peripheral devices.
2. Remove the power supply:
Installing options
89