IBM Netfinity 5100 8658 21Y, Руководство пользователя

Страница: 21 / 246

Rear view
(tower shown)
1
AC power LED
2
DC power LED
AC Power Light: This light provides status information
about the power supply. During normal operation, both the
AC and DC Power lights are on. For any other combination
of lights, see “Power supply LEDs” on page 19.
DC Power Light: This light provides status information
about the power supply. During normal operation, both the
AC and DC Power lights are on. For any other combination
of lights, see “Power supply LEDs” on page 19.
Starting the server
After you have plugged the power cord of your server into
an electrical outlet and the power supply has been turned
on, the server can be activated in several ways:
v You can turn on the server by pressing the Power
control button on the front of the server.
Note: If you have just plugged the power cord of your
server into an electrical outlet, you will have to
wait approximately 20 seconds before pressing
the Power control button.
General information
11