IBM Netfinity 5100 8658 21Y, Руководство пользователя

Страница: 80 / 246

Note: Check the instructions that come with the
adapter for any requirements or restrictions.
4. Remove the expansion-slot cover:
a. Press the arrow on the adapter-retention bracket
release tab and remove the bracket.
b. Slide the expansion-slot cover out of the server.
Store it in a safe place for future use.
Attention: Expansion-slot covers must be installed
on all vacant slots. This maintains the electromagnetic
emissions characteristics of the system and ensures
proper cooling of system components.
5. Refer to the documentation that comes with your
adapter for any cabling instructions. It might be easier
for you to route any cables before you install the
adapter.
6. Remove the adapter from the static-protective
package.
Attention: Avoid touching the components and
gold-edge connectors on the adapter.
7. Place the adapter, component-side up, on a flat,
static-protective surface.
8. Set any jumpers or switches as described by the
adapter manufacturer.
9. Install the adapter:
a. If necessary, open the adapter support bracket
retaining flap.
b. Carefully grasp the adapter by its top edge or
upper corners, and align it with the expansion slot
on the system board.
c. Press the adapter firmly into the expansion slot.
Attention: When you install an adapter in the
server, be sure that it is completely and correctly
seated in the system-board connector before you
apply power. Incomplete insertion might cause
damage to the system board or the adapter.
d. Close the retaining flap on the adapter support
bracket, if you opened it.
e. Align the bottom tabs of the adapter retention
bracket with the holes at the top of the expansion
slots, and press the adapter retention bracket
toward the back of the server until it clicks into the
locked position.
10. Connect any needed cables to the adapter.
Attention: Route cables so that they do not block
the flow of air from the fans.
70
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY