IBM Netfinity 5100 8658 21Y, Руководство пользователя

Страница: 90 / 246

v If you are installing a digital linear tape (DLT)
backup drive, the slide rails and screws are
included in the optional power supply backplane kit.
7. Align the rails on the drive with the guide rails in the
drive bay.
8. Push the drive into the bay until it clicks into place.
9. If the drive is an IDE device:
v
Make sure the drive is not a hard disk drive.
v
Plug a connector on the IDE cable into the back of
the drive.
v Make sure the other end of the IDE cable is
plugged into the IDE connector on the system
board.
v
Go to step 11.
10. If the drive is a SCSI device:
a. Make sure the drive is not a hard disk drive.
b. Obtain a 16-bit SCSI cable to connect the device
to the connector for SCSI channel B on the
system board, or to an optional SCSI adapter. A
suitable cable usually comes with your SCSI
device.
c. Connect one of the connectors on the SCSI cable
to the back of the drive.
d. Connect the other end of the SCSI cable to the
SCSI channel B connector on the system board,
or to an optional SCSI adapter, as appropriate.
See “System board internal cable connectors” on
page 56 for the location of the SCSI connectors.
See also “SCSI ports” on page 102 for information
about SCSI connections and devices.
11. Connect a power cable to the back of the drive.
Power cables for non-hot-swap drives come installed
in your server. The connectors are keyed and can be
inserted only one way.
12. If you are installing another non-hot-swap drive, do so
at this time. Otherwise, continue with the next step.
13. If you have other options to install or remove, do so
now; otherwise, replace the cover (see “Installing the
cover” on page 92 for details.
Installing memory modules
Adding memory to your server is an easy way to make
programs run faster. You can increase the amount of
memory in your server by installing options called
memory-module kits . Each kit contains one
industry-standard, dual-inline memory module (DIMM).
Your server uses a noninterleaved memory configuration.
80
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY