IBM Netfinity 5100 8658 21Y, Руководство пользователя

Страница: 139 / 246

Note: The Netfinity Database Administration Tool
can also be used to GRANT or REVOKE
privileges.
v userid is the user ID to be granted access
3. Press Enter to execute the command.
To revoke privileges, substitute REVOKE for GRANT in the
command line.
Database privileges on OS/2 systems:
1. Use the GRANT EXECUTE command to enable
Netfinity Manager to access the database.
Type the following command at the OS/2 prompt:
DB2 GRANT EXECUTE ON PACKAGE NETFIN.DB2SQLC0 TO
PUBLIC
and then press Enter.
Note: Specify PUBLIC or authorize only specific
manager systems. To limit access to the
database, substitute the authorization name of
the managing system for PUBLIC.
2. Use the CONNECT RESET command to disconnect
current users from the database.
Type the following command at the OS/2 prompt:
DB2 CONNECT RESET
and then press Enter.
3. Use the NETFINDB GRANT command to grant (or
revoke) database privileges.
To grant or revoke table privileges on OS/2:
a. Insert the Netfinity Manager CD into the CD-ROM
drive (in this example, drive D; individual drive
letters might be different).
b. Make the CD-ROM drive the active drive.
Type
D:
and then press Enter.
c. Type the following command:
NETFINDB GRANT /ID= id PUBLIC
/DBNAME= databasename /PRIV= privilegecode
where
v
id is the user ID to be granted access
v databasename is the name of the database as
specified during NETFINDB execution
v privilegecode is one of the following privilege
codes:
– ALL
– ALTER
– CONTROL
– DELETE
– INDEX
Netfinity Manager
129