IBM iSeries Series, Анализ проблем аппаратного обеспечения (системные ссылочные коды

Страница: 287 / 306

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6972 High Speed Link (HSL) resource failure
Multi-adapter Bridge (MaB) failure detected.
For this reference code the failing item list presented in the
″
Service Action
Log
″
can be different from the failing item list documented here. That is
due to the differences in system models and features installed.
If the
″
Service Action Log
″
is available then use the failing item list
presented there for servicing this reference code.
If the
″
Service Action Log
″
is not available then use the failing item list
documented here. By following the procedures in the symbolic FRUs listed
here you will isolate to the correct FRU list based on system model and
features installed.
MA_BRDG
6973 High Speed Link (HSL) resource failure
Mulit-adapter Bridge has detected a problem in the card installed in the
location specified in word 7 of the SRC.
If this SRC occurs on a system, check word 5 of the SRC. If word 5 is not
zero (0000 0000) , use the FRU list in the Service Action Log or the
Symbolic FRU PIOCARD. If word 5 is zero, find the FRU by using the
Symbolic FRU SIIOADP.
PIOCARD
---OR--
SIIOADP
6974 Multi-adapter bridge configuration change or error
PCI I/O processor rejected the assignment of or the removal of an I/O
adapter.
The direct select address in word 7 of the SRC specifies the location of the
IOA. The direct select address of the IOP is in word 5 of the SRC.
Use the DSABRKDWNTAB and the CARDPOSTAB to determine the card
locations for the IOA and the IOP.
Use slot concurrent maintenance under HSM to assign or remove the IOA.
MABRCFG
6975 The system issued a reset/reload to the service processor.
Service processor error.
AJDGP01
6976 Service processor failure.
For this reference code the failing item list presented in the
″
Service Action
Log
″
can be different from the failing item list documented here. That is
due to the differences in system models and features installed.
If the
″
Service Action Log
″
is available then use the failing item list
presented there for servicing this reference code.
If the
″
Service Action Log
″
is not available then use the failing item list
documented here. By following the procedures in the symbolic FRUs listed
here you will isolate to the correct FRU list based on system model and
features installed.
SVCPROC
B6xx (including A6xx)
System Reference Codes
283