IBM IBM 2212-40H, Руководство по установке и первоначальной настройке

Страница: 57 / 90

Copying a File Using the Copy Command
Question How do I copy a load image or configuration file from one bank in the
2212 to another?
Answer
The copy command allows you to copy a load image or configuration
file from one location on the hard file or compact flash to another. This
command allows you to change the status as well. The file that you
copy always receives the status of the storage area that it is copied to.
From the OPCON (
*
) prompt:
1. At the OPCON ( * ) prompt, type talk 6. The Config> prompt will be
displayed.
2. At the Config> prompt, type boot. The Boot config> prompt will be
displayed.
3. At the
Boot config>
prompt, to copy a configuration file, type the
following commands:
Boot config
>
copy config
Copy FROM Bank number? A
Copy FROM Config number? 1
Copy TO Bank number? B
Copy TO Config number? 1
To copy a load image, at the Boot config> prompt, type copy load.
You will be prompted for the source bank (A or B) and destination
bank (A or B).
From the SVC> prompt:
1. Access the
SVC>
prompt. (See “Accessing the Service Recovery
Prompt (SVC>)” on page A-5).
2. At the
SVC
>
prompt, type copy. You will be prompted for the rest of
the information, as shown in the following example.
‡ —
svc>copy
BankA ---+--------- Description ----------+------ Date -------+
IMAGE - PENDING 10 Feb 1998 17:46
CONFIG 1 - AVAIL 10 Feb 1998 17:46
CONFIG 2 - AVAIL 09 Jan 1998 10:40
CONFIG 3 - AVAIL 06 Jan 1998 15:46
CONFIG 4 - PENDING * 02 Jan 1998 11:51
+------ BankB -----------+--Description ----------+------ Date -------+
IMAGE - AVAIL 14 Feb 1998 15:38
CONFIG 1 - AVAIL * 03 Feb 1998 14:43
CONFIG 2 - AVAIL 22 Jan 1998 13:43
CONFIG 3 - AVAIL 06 Jan 1998 17:25
CONFIG 4 - AVAIL 26 Jun 1998 09:48
Load or Config? c
Enter source bank : a
Enter source config <1-4>: 3
Enter destination bank : b
Enter destination config <1-4>: 3
/hd0/sys0/CONFIG2 --> /hd0/sys1/CONFIG2
Copy configuration commmand successful!
ˆ ˜
Appendix A. Common Tasks
A-19