IBM IBM 2212-40H, Руководство по установке и первоначальной настройке

Страница: 37 / 90

Full Configuration
The initial configuration procedure you have just performed will enable you to
access the 2212 over the network if you configured an IP address for it.
The configuration provided by QCONFIG depends upon many default values for
parameters, some of which may not be appropriate to your installation. You may
need to modify the configuration that you have created using QCONFIG to
customize the 2212 to work on your network. You can do this using either of these
methods:
¹
Configuration Program
The Configuration Program is the recommended configuration method for
these reasons:
1. It can enable you to keep a number of copies of configuration files on a
server for uploading to the appropriate 2212s.
2. It does not alter any configuration parameters dynamically. This feature
helps you control changes to the 2212 configurations.
3. It performs more input validation and cross-checking of the configuration
parameters than the other methods.
See the following guides for help creating a full configuration:
– Configuration Program User’s Guide
– Access Integration Services Software User’s Guide
– Access Integration Services Using and Configuring Features
–
Access Integration Services Protocol Configuration and Monitoring
Reference, Volumes 1 and 2
¹
Command line interface (OPCON)
The command line interface is useful when you want to change one of the
parameters that can be dynamically altered. It can also be used to create a
full-configuration, but without the validation and cross-checking of the
Configuration Program. For more information about the command line interface,
refer to the guides mentioned above.
Chapter 4. Performing the Initial Configuration
4-3