IBM HS40 - BladeCenter - 8839, Инструкция по установке и эксплуатации

Страница: 80 / 120

Beep code descriptions
If POST or the BMC detects a problem during startup, it might emit one or more
beep. You can use the following beep code descriptions to help diagnose and solve
problems that are detected during startup. Beep codes indicating specific system
problems are listed in the following tables. See “Diagnostics” in the BladeCenter
HS40 Type 8839 Hardware Maintenance Manual and Troubleshooting Guide on the
IBM BladeCenter Documentation CD or the IBM BladeCenter T Documentation CD
that comes with your blade server for more information about the beep codes.
Table 3. POST beep code descriptions
Beep code Descriptions of the POST beep codes
1, 2, or 3 Memory error. Complete the following steps if this problem occurs:
1. Make sure that the memory modules are installed correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
6 and 7 System error. Call for service.
5 short and 1
long
Memory error. Complete the following steps if this problem occurs:
1. Make sure that the memory modules are installed correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
6 short and 1
long
Memory error. Complete the following steps if this problem occurs:
1. Make sure that the memory modules are of the correct type and that they are installed
correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
7 short and 1
long
System memory error. Call for service.
Table 4. BMC beep code descriptions
Beep code Descriptions of the BMC beep codes
1-5-1-1 Microprocessor error. Complete the following steps if this problem occurs:
1. Make sure that the microprocessors are installed correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
1-5-2-2 No microprocessor detected. Complete the following steps if this problem occurs:
1. Make sure that the microprocessors are installed correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
1-5-2-3 Microprocessor error. Complete the following steps if this problem occurs:
1. Make sure that the microprocessors are of identical type and that they are installed correctly.
2. Turn off the blade server; then, restart the blade server. If the problem remains, call for
service.
1-5-4-2 Power error. Complete the following steps if this problem occurs:
1. Remove the blade server from the BladeCenter unit; then, reinstall it and restart the blade
server.
2. If the problem remains, call for service.
1-5-4-4 Power error. Complete the following steps if this problem occurs:
1. Remove the blade server from the BladeCenter unit; then, reinstall it and restart the blade
server.
2. If the problem remains, call for service.
66
BladeCenter HS40 Type 8839: Installation and User’s Guide