IBM HS40 - BladeCenter - 8839, Инструкция по установке и эксплуатации

Страница: 53 / 120

c. Pivot the storage expansion unit closed and press it firmly into place until
the blade-cover releases click. The connector on the expansion unit
automatically aligns with and connects to the blade expansion connector
(J3A1) on the processor board.
9. Insert the combined blade and expansion unit into three adjacent BladeCenter
unit bays.
Note: When any blade server or option is in blade bay 7 through 14 (in the
BladeCenter unit) or blade bay 5 through 8 (in the BladeCenter T unit), power
modules must be present in all four power bays.
10. Turn on the blade server.
11. If you have not already done so, install the LSI SCSI device drivers for your
operating system. LSI device drivers are on the ServerGuide Setup and
Chapter 3. Installing options
39