IBM HS21 - BladeCenter - 8853, Руководство по диагностике и обслуживанию

Страница: 113 / 140

4. Firmly press on the indicated locations to seat the expansion card.
Note: For device-driver and configuration information to complete the
installation of the expansion card, see the documentation that comes with the
expansion card.
5. Install the blade server cover (see “Installing the blade server cover” on page
81).
6. Install the blade server into the BladeCenter unit (see “Installing the blade
server in a BladeCenter unit” on page 78).
Removing the battery
To remove the battery, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 75
2. If the blade server is installed in a BladeCenter unit, remove it (see “Removing
the blade server from a BladeCenter unit” on page 77 for instructions).
3. Remove the blade server cover (see “Removing the blade server cover” on
page 80 for instructions).
4. If a Memory and I/O Expansion Blade is installed, remove it (see “Removing an
expansion unit” on page 82).
5. Locate the battery on the system board.
Battery (BH1)
6. Use one finger to press the top of the battery horizontally away from the socket,
toward the interior of the blade server.
7. Lift and remove the battery from the socket.
8. Dispose of the battery as required by local ordinances or regulations.
Chapter 4. Removing and replacing blade server components
97