IBM HS21 - BladeCenter - 8853, Руководство по диагностике и обслуживанию

Страница: 37 / 140

v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v
See Chapter 3, “Parts listing, Types 1885 and 8853,” on page 73 to determine which
components are CRUs and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must
be performed only by a trained service technician.
Error message Action
Internal error CPU xx fault Ensure that all of the software and the
drivers are at the latest levels.
CPU xx over temperature Make sure that the blade server is sufficiently
cooled.
CPU xx fault (Trained service technician only) Replace
microprocessor xx .
CPU xx disabled (Trained service technician only) Replace
microprocessor xx .
Invalid CPU configuration Ensure that microprocessors xx are
supported and compatible.
VRD 5d power good fault
1. Remove the blade server from the
BladeCenter; then, reinstall it.
2. (Trained service technician only) Replace
the system board assembly.
Hard drive xx removal detected Replace the Hard disk drive xx .
Hard drive xx fault Information only. No action required.
Chapter 2. Diagnostics
21