IBM HS21 - BladeCenter - 8853, Руководство по диагностике и обслуживанию

Страница: 53 / 140

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Types 1885 and 8853,” on page 73 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
00151720 Parity Error Detected on Processor bus.
1. Reseat the following components:
a. (Trained service technician only)
Microprocessor 1
b. (Trained service technician only)
Microprocessor 2
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. (Trained service technician only)
Microprocessor 1
b. (Trained service technician only)
Microprocessor 2
c. (Trained service technician only) System
board assembly
00151730 CRC Error Reseat all memory DIMMs
00151801 Running from Mirrored Memory Image
1. Reseat DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.
2. Replace DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.
01295085 ECC checking hardware test failed
1. Reseat the following components:
a. (Trained service technician only)
Microprocessor 1
b. (Trained service technician only)
Microprocessor 2
2. Replace the following components, one at a time,
in the order shown, restarting the blade server
each time:
a. (Trained service technician only)
Microprocessor 1
b. (Trained service technician only)
Microprocessor 2
c. (Trained service technician only) System
board assembly
012980 xx The BIOS does not support the Processor
P xx
1. Make sure that the microprocessor xx is
supported.
2. Update blade server firmware.
012981 xx Unable to apply the Microcode Update for
Processor xx
1. Make sure that microprocessor xx is supported.
2. Replace microprocessor xx .
I9990303 No Boot devices found Install operating system to hard disk drive.
Chapter 2. Diagnostics
37